Products
Industry High Purity Oxygen Gas Machine
High-purity oxygen (in contrast to oxygen-based products) has a higher concentration of oxygen than normal pure oxygen products. This means it is much more expensive to produce, but because the concentration of oxygen gas is increased, there is no danger to your lungs or your health.
Oxygen Capacity: 1-200Nm³/hr
Oxygen Purity: 90-95%
Oxygen Pressure: 0.1-0.5Mpa (150-200Bar Refilling Pressure can be offered)
Send Inquiry
Product Description
China Industry High Purity Oxygen Gas Machine Manufacturers
China Industry High Purity Oxygen Gas Machine Suppliers
Industry high-purity oxygen gas machines from manufacturers have been widely used in various fields. The main industrial application of oxygen is combustion. Many materials that do not normally burn in air will burn in oxygen so mixing oxygen with air greatly enhances combustion efficiency in iron and steel, non-ferrous, glass, and concrete industries. It is widely combined with a fuel gas for cutting, welding, brazing, and glass blowing, offering much higher flame temperatures and thus greater efficiency than just air. With oxyfuel, plasma, and laser processes, a jet of gaseous oxygen is used to cut steel. Oxygen is also popular in thermal lancing to drill or cut through materials such as concrete, brick, stone, and various metals.
1. Parameter (Specification) of Industry High Purity Oxygen Gas Machine
| Model | Capacity | Purity |
| ZRO-3 | 3Nm³/h | 90-95% |
| ZRO-5 | 5Nm³/h | 90-95% |
| ZRO-10 | 10Nm³/h | 90-95% |
| ZRO-20 | 20Nm³/h | 90-95% |
| ZRO-30 | 30Nm³/h | 90-95% |
| ZRO-50 | 50Nm³/h | 90-95% |
| ZRO-100 | 100Nm³/h | 90-95% |
| ZRO-150 | 150Nm³/h | 90-95% |
| ZRO-200 | 200Nm³/h | 90-95% |
Industrial Nitrogen Generator supplier uses clean compressed air as raw material and zeolite molecular sieve (ZMS) as adsorbent, to produce oxygen gas with Pressure Swing Adsorption (PSA) technology at normal temperature. ZMS is a round granular adsorbent full of micropores inside and outside, which has the characteristic of selective adsorption. N2 has a higher diffusion rate while O2 has a lower, therefore N2 is adsorbed into ZMS while O2 is out of it. By controlling the on/off state of the pneumatic valves by PLC, adsorbing under pressure and regenerating without pressure, to separate nitrogen and oxygen gas, and create a continuous flow of oxygen with required purity.
2.Introduction of Industry High Purity Oxygen Gas Machine
3. Features of advanced Industry High Purity Oxygen Gas Machine
1) Adopt a human-computer interface and intelligent control to make simple operations and supply qualified oxygen gas quickly.
2) High-efficiency filling technology of molecular sieve, to makes ZMS much tighter, firmer and longer service life.
3) Adopt international famous brands PLC and pneumatic valves, to switch automatically and make operation more stable.
4) Pressure, purity, and flowrate are stable and adjustable and can meet different requirements of customers.
5) Compact structure, nice appearance, and small occupation area.
4. Applications of high-quality Industry High Purity Oxygen Gas Machine
1) Sewage treatment: oxygen-enriched aeration for activated sludge, pond oxygenation, and ozone sterilization.
2) Glass melting: combustion-supporting dissolution, cutting to increase yield and extend the service life of stoves.
3) Pulp bleaching and paper making: changing chlorinated bleaching to oxygen-enriched bleaching with low-cost, sewage treatment.
4) Non-ferrous metal metallurgy: oxygen-enriched smelting of steel, zinc, nickel, lead, etc. PSA technology is gradually taking the place of cryogenic technology.
5) Petrochemical and chemical industry: increasing the reaction speed and chemical production output by adopting an oxygen-enriched oxidizing reaction.
6) Ore treatment: use oxygen in gold, etc. production process, to improve precious metal extraction efficiency.
7) Aquaculture: increasing dissolved oxygen in water by oxygen-enriched aeration to vastly improve fish yield, also can use oxygen when transporting lives fish.
8) Fermentation: replacing air with oxygen in fermentation to drastically improve efficiency.
9) Drinking water: providing oxygen to the ozone generator for sterilization.
10) Medical: oxygen bar, oxygen therapy, physical health care, etc.
5.Shipment of Industry High Purity Oxygen Gas Machine manufacturer
Hot Tags: Industry High Purity Oxygen Gas Machine from China factory, Manufacturers, Suppliers, Buy, Customized, Factory, China, Made in China, Price
The industry high purity oxygen gas machine company is doing business since 2012 and has introduced many high-end technology products to the world market. Our products have passed through strict quality inspection, and they are widely used in the mining and mining equipment manufacturing, chemical production, oil refining, metallurgy and chemical industry.
Industry high purity oxygen gas machines are a type of industrial equipment used to purify air or gases (such as oxygen).
Industry high purity oxygen gas machines are some of the most widely used industrial products, and the technology has common applications in the construction, agriculture and industrial sectors. The products include high-pressure air handlers and portable compressors.
The common types of industry high purity oxygen gas machines are:
• HPMO (High pressure membrane oxygen)
• MHO (Membrane oxygen)
• PEO (Pressure equalization oxide)
• PORO (Pressure equalization oxide with steam)
What is High Purity Oxygen Gas?
The main advantage of high purity oxygen gas compared to normal pure oxygen:
• It provides better value for money because it’s cheaper • It’s safer, since there’s less risk of a drop in concentration
The downside: the concentration of O2 content in said product is still very high, which can be problematic if you want to use it as an inhaler (meaning you generally want to increase the O2 content).
